Analysis of a Phenoxyacid Herbicides standard in the miniLC
Analysis of a Cannabinoids standard in the miniLC
Analysis of an Aldehydes/Ketones standard in the miniLC
Analysis of Phenols (US EPA Method 604) in the miniGC Introduction Phenols or phenolic compounds are toxic compounds that are found in bodies of water that originate from industrial pollution as well as natural decomposition of animal and plant materials. Reference Method (https://www.restek.com/en/pages/chromatogram-view/GC_CF01131) Column MXT-5, 30 m, 0.28 mm ID, 0.25 µm Sample 604 Phenols…
Read more
Analysis of Phthalate Esters (US EPA Method 606) in the miniGC Introduction Phthalates or phthalate esters are plasticizers that add flexibility to materials like PVC (polyvinylchloride). They are a very commonly occurring persistent organic pollutant (POP) that can be found in the environment and food and are a toxicity concern, therefore methods and regulations like…
Read more
Analysis of C7-C40 saturated alkanes standard in the miniGC Introduction In this app note we run a standard in the miniGC containing saturated alkanes from C7 (Heptane) to C40 (Tetracontane). The compounds are the constituent compounds of gasoline, diesel fuel, kerosene, and motor oils, therefore it is an important test for a GC to be…
Read more
Analysis of Semivolatile Organic Compounds (SVOCs) in the miniGC Introduction In this app note we run a standard in the miniGC containing 13 compounds considered to be Semivolatile Organic Compounds (SVOC), a class of compounds that are monitored by EPA Method 8270 as contaminants in solid waste, soils, surface water, ground water, and air. The…
Read more
Analysis of Terpenes in the miniGC Introduction Shown here are a couple of different terpenes mixes run with a few different methods. miniGC Method 1 Column MXT-5, 30 m, 0.25 mm ID, 0.25 µm (cat.# 70223-LUC25) Sample Injection Inj. Vol.: 1.0 µL split (split ratio 20:1) Liner: 4 mm low pressure drop precision inlet liner…
Read more
Analysis of Residual Solvents standard in the miniGC miniGC Method Column MXT-624, 30 m, 0.25 mm ID, 1.40 µm (cat.# 70968-LUC25) Sample Injection Inj. Vol.: 1.0 µL split (split ratio 10:1) Liner: 4 mm low pressure drop precision inlet liner w/ wool (cat.# 23309) Inj. Temp.: 280 °C Oven Oven…
Read more
Analysis of Active Compounds (Restek Test Mix Xil-350) in the miniGC Introduction This test mix is used to test activity in the flow path, from the injection port all the way through to the detector. If there are too many active sites in the system, the peak shapes will be poor. This particular set of…
Read more
